Studying For Solar Courses

In a nutshell, 'Green Energy' utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. When 'Green', they are all thought to be replenishable and natural. Often, by going back in time, we can see the value of wind power and windmills as modern energy sources. Regardless of this, we are mainly talking about using modern techniques to offer planet friendly and eco-efficient solutions.

In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. To gain electricity from roof panels you would need solar electrical panels (PV's). Following on from this is a process known as Biomass Energy - which includes Boilers burning wood and other fuels. We now also have Ground Source Heat Pumps - which draw out the heat left by the Sun. Finally, we have two of the most traditional forms of energy generation that have gone through some resurgence over the last few years; these being Wind Power, Wind Turbines and Hydropower (including Water Wheels.)

Thermal Energy Systems: By using different technologies, Solar Energy is effectively made up of two types of solar panels. Making hot water from solar energy is the first stage - and is known as Solar Water Heating Collection. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels - which transform solar radiation into electricity. Across the board, Solar Panels should be mounted on a south facing roof, at an angle of 30 degrees away from horizontal - and to some extent away from blocking trees, surrounding buildings and chimneys.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household's hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.

Biomass Energy Technology: This term encompasses all forms of natural products - such as plant and animal material. It is extremely useful - in that it can produce a range of power sources, including heat and electricity. It is interesting to note that the UK has some of the largest quantities of Biomass material to generate electricity within Europe. It should be borne in mind that the whole process is designed to produce energy without an impact on CO2. As each tree felled, it is replaced by another. This helps to reduce the overall effect on C02.

'Energy Crops' trees such as Willow and Poplar play a major part in the process - under the banner of Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses - because of their yield of dry matter. Whilst Agricultural and Municipal waste may be lesser known, they are essential to the whole process. One natural offshoot of agricultural work is Agricultural Waste. Municipal Waste such as food or wood can also be utilised as a biomass product.

Geo-Thermal Energy: Basically this is the warming of the Earth from the Sun - and is often used in the manufacture of warm water and electricity. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. With four units replaced for every one unit of energy used, these heat pumps are very effective. Utilising the energy generated from wind turbines and solar electrical panels alongside heat source pumps, can make them alomst 100 percent renewable.

Wind Energy: The use of wind as a source of energy has been going on for thousands of years, especially in milling grain and pumping water. However, in more recent times there's been the option to recover the energy for its own sake - and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Instead of producing electricity at a rate of 2-10p per kWh, we could be generating at 2p per kWh. From this, the estimation of the cost recovery period is around 6-9 months overall.

Finally, we have Hydropower; an area in which the UK does well within Europe. Having said that, the art of using energy from moving water (just like wind power) is very traditional. In total, this could produce something like 2 percent of all electricity required in the UK.

The Hydropower process uses a turbine that can convert the energy from one form into another. The important thing is that, without having to rely on water storage, the turbines can generate electricity. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as 'Micro-Hydro'. This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. The capital cost of installing a micro-hydro system can run between 200 and 3000 pounds per kW of energy output.

The demand on 'Green Energy' continues to develop - in light of the energy demands worldwide. The UK remains one of the main beneficiaries of this technology.

With the rise in demand for domestic installations, both Electricians and Plumbers are well placed to take advantage of this technology. With 'Green Energy' rising up the political agenda in Europe, a range of financial aids and grants are becoming available. It is important to gain the correct qualifications to install these items. Electrical or plumbing training that incorporates green technology could be very useful for the future.

Copyright Scott Edwards. Go to Solar Energy Courses or CLICK HERE.